☃️Holiday Specials ON NOW! Call or Text 725-777-4544☃️

Skip to content

Mr. Steam Steam@Home® 4.5kW Steam Bath Generator at 240V | SAH4500C1

Sale price$1,162.00 USD Regular price$1,660.00 USD
Save 30%

+0% Tax +Free Shipping (Ex. Apply)

🏆‎ ‎ Authorized Mr. Steam Dealer
💵 ‎ Lowest Prices Guaranteed
📞‎ ‎ Questions? Call Us +1 (725) 777-4544

Mr. Steam Steam@Home® 4.5kW Steam Bath Generator at 240V

The Steam at Home package includes a steam generator, polished chrome steam head with acrylic shield, 20-minute SteamStart control, durable electronic components, 30-foot cable, and a variety of other features.

When engineering this generator, Mr. Steam focused on ensuring a consistent and reliable steam production. The Mr. Steam SAH 4500 steam generator is constructed of corrosion-resistant stainless steel throughout and features a durable electronic printed circuit board.

This all-in-one steam shower unit brings the luxury of steam bathing into your home at an affordable price. The compact size of the generator makes it perfect for starter homes, guest baths, and smaller residential steam rooms. The unit can be installed up to 60 feet away from the steam shower enclosure in closets, vanities, and other similar locations.

The Steam@Home 4500 generator uses less than one gallon of water for a 20-minute bathing session, making it both economical and eco-friendly. The steam unit is equipped with an ASME safety valve and a full port drain valve for greater safety.

The included Steam Start control can be installed inside or outside of the steam room. At the push of a button, the control will initiate a 20-minute bathing session.

The Mr. Steam SAH4500 is available in either 208V (SAH4500B1) or 240V (SAH4500C1), single-phase (1PH) configurations.

The Steam at Home 4500 steam bath generator carries a limited lifetime warranty and is fully serviceable.


  • 4.5KW Steam bath generator
  • SteamStart surface-mounted control, 1-1/2” diameter, 1/8” deep
  • 3-Pin Control cable, 30’ long, hard-wired to control with plug-in connector
  • Cool-to-the-Touch steamhead, 1/2” NPT, 3-1/16” diameter, 1-13/16” deep
  • Acrylic shield, 4-3/8" diameter, 1/2" deep
  • RTV silicone sealant, .5 ounce tube
  • Installation and operation manual
  • Limited warranty


SAH4500 Generator

  • Unitized stainless steel reservoir
  • Durable electronic components
  • Electronic water-level control system
  • Stainless steel design inside and out
  • Low voltage safety control circuits
  • Built in 24-volt circuit
  • ASME safety valve
  • Full port drain valve
  • UL/CSA/CE listed

SteamStart Control

  • On/Off operation
  • 20-Minute run cycle non-adjustable
  • Low profile
  • Polished Chrome trim
  • Inside/outside the steam/shower enclosure installation
  • Low voltage operation

Cool-to-the-Touch Steamhead

  • Quieter operation
  • Integral reservoir for a scented steam bath
  • Low profile and sleek design
  • Polished Chrome finish

Acrylic Shield

  • Clear Lexan construction, 1/8” thick, transparent look
  • Measures 4-3/8" in diameter and is 1/2" deep
  • Integral, 1-5/8” diameter mounting hole


Model      SAH4500
Maximum Adjusted Cubic Feet     100
Kilowatt Rating (KW)     4.5 KW
Shipping Weight (Lbs.)     25 lbs
Electrical Specifications     (refer to Electrical chart)
Water Supply Connection     3/8" NPT
Generator Steam Line Connection     3/8" NPT
Steam Head Connection     1/2" NPT
Drain Connection     1/4" NPT
Safety Relief Valve Connection     3/4" NPT
Safety Relief Valve PSIG     15 PSIG
Generator Control Connection     3-Pin, Plug-In Connector
Generator Control Cable     30', 3 Conductor, 24 AWG, Shielded Cable
Width     14-3/8"
Depth     5-3/16"
Height     14-7/8"
Adjustable Timer     No
Session Timing     20 minutes

Free shipping

Premium Quality

No sales tax