Amerec AK Series 11KW Steam Shower Generator | AK11
+0% Tax +Free Shipping (Ex. Apply)
🏆 Authorized Amerec Dealer
💵 Lowest Prices Guaranteed
📞 Questions? Call Us +1 (725) 777-4544
Amerec AK Series 11KW Steam Shower Generator | AK11
The Amerec AK11 is designed for home and day spa steam baths with dimensions up to 375 adjusted cubic feet (ACF).
The AK11 steam shower generator includes a durable stainless-steel tank, industrial-grade heating elements, durable electronic components, an electronic water level control system, and a variety of other noteworthy features.
When engineering this generator, Amerec focused on ensuring the most consistent steam production and temperature for a satisfying steam bath. The AK11 steamer uses a Sequential Temperature Control to ensure a consistent and even flow of soft steam.
Amerec AK Series steam generators are built to power the most demanding home and commercial steam rooms. The AK11's stainless-steel tank and water level probes provide years of reliable, trouble-free operation. The AK11 steam shower unit is equipped with removable heating elements for easy and economical service.
Features
- Sequential temperature control for consistent flow
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Available Auto Drain automatic draining system
- Ability to field wire in 1-phase or 3-phase
- Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
Includes
- 11kW steam bath generator
- Installation and operation manual
- Limited warranty
Specification
Details
| Model | AK11 |
|---|---|
| Minimum Adjusted Cubic Feet | 175 |
| Maximum Adjusted Cubic Feet | 375 |
| Kilowatt Rating (KW) | 11KW |
| Shipping Weight (Lbs.) | 35 lbs |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 46 Amps |
| Recommended Protective Device | 60 Amps |
| Recommended Minimum Copper Wire Supply | 6 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 3/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 10 PSIG |
| Control "Rough In" Cut Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width In Inches | 16-1/2" |
| Depth In Inches | 6-1/4" |
| Height In Inches | 15" |